فئة المنتج

الخدمة عبر الإنترنت

الآن الاتصال

مسح لزيارة

الصفحة الرئيسية > قائمة المنتجات > DC امدادات الطاقة > 150V DC التيار الكهربائي > منتجات إمدادات الطاقة APM 150V 30A 2U

منتجات إمدادات الطاقة APM 150V 30A 2U

حصة ل:

أضف إلى سلة المشتريات

منتجات إمدادات الطاقة APM 150V 30A 2U

سعر الوحدة:	1~10 USD
الدفع نوع:	T/T
إنكوترم:	EXW
أدني كمية الطلب:	1 Piece/Pieces

Ms. Emily Cui
الدردشة الآن

الآن الاتصال

تحميل: 1U 2U DC source data sheet 20200814

معلومات أساسية

نموذج: 150VDC series(2U Type)

علامة تجارية: APM

مكان المنشأ: الصين

Input Frequency: 47~63hz

Input Voltage: 190~265v

Power Factor: ≥0.98

Output Voltage Range: 0~150v

Output Current Range: 0~30a

Output Power Range: 0~1500w

Height: 2u

Warranty: 2 Years

Interface: Rs232/Rs485/Usb(Standard)

Additional Info

تفاصيل التعبئة والتغليف: كرتون

إنتاجية: other

نقل: Air,Ocean

مكان المنشأ: الصين

الدعم: other

الشهادات: ISO9001/CE/ROHS/CSA/UL

رمز النظام المنسق: 8504401990

ميناء: DHL

الدفع نوع: T/T

إنكوترم: EXW

وصف المنتج

مقدمة المنتج:

APM SP-1U/2U series high-performance programmable DC power supply, standard RS232/RS485/USB communication interface, support SCIP protocol, convenient for remote control, industrial PLC control and component intelligent test platform. The remote compensation terminal can avoid the inaccuracy of the test caused by the voltage drop on the wire. Low ripple, low noise, and built-in digital voltmeter, convenient for external measurement.

APM technologies products of our company are: Programmable Power Supplies,DC Power Supplies,AC Power Supplies, DC Electronic load,Three Phase AC Source System,Lab Power Supply. If you are intrested, please contact us.

Dc Power

مجالات التطبيق:

● Aerospace Sector: Used for aviation electronic products testing and power supply.

● Household Field:Used for household products test.

● Medical Field:Used for medical device testing or it being integrated in medical equipment.

● LED Sector: Used for LED driver and LED product testing and burn-in test.

● Automobile Sector: Used for automobile electronics product testing,and simulation of the voltage waveform of automobile under different conditions.

● قطاع الاختبار التلقائي: يمكن دمجه في نظام الاختبار التلقائي لاختبار معلمات الكهرباء ، ولتوفير الطاقة للمنتجات قيد الاختبار.

● Communication Sector: Used for the tests of communication power supply and electronic devices.

● Scientific Research Sector:Used in scientific research units, colleges & universities,and certification institutions for laboratory testing and power supply.

مواصفات المنتج:

● Standrad RS232/RS485/USB interface.

● Remote sensing to compensate for voltage drop in load leads.

● DVM independent measurement functions.

● Function of editing List waveform.

● Coded knobs, multifunctional keyboard.

● CE/UL/CSA/FCC معتمد.

● With accurate voltage and current measurement capability.

● Use SCPI commands.

Product Advantages:

(1)High efficiency
APM programmable 150VDC source has an operating efficiency of up to 93%. In the circuit design, switch tube is using zero (0) voltage conductor and when the circuit is running, the damage inflicted on the device itself is reduced, and subsequently increase the overall efficiency while lowering the rate of temperature rise of the DC source. Compare with other similar types of product in markets, APM Technologies' programmable DC source has an obvious advantage.
(2)Ultrafast Respond Time
The unique fast drop function makes the response of APM programmable 150VDC source much better than that of any other similar products available on the market.

No load voltage rise time	≤25ms	Full load voltage rise time	≤25ms
No load voltage drop time	≤500ms	Full load voltage drop time	≤25ms

(3)DVM measurement function
APM programmable DC source's built-in DVM independent measurement function can measure the value of output voltage at the output terminal, and display the value at VFD screen by switchover the front-panel buttons. The DC source can also be used as external equipment in laboratory testing to measure the voltage values.
(4)Master/Slave Control
In the master-slave control mode, up to 8 units in series and 10 units in parallel.
Master-slave control mode can realize the effect as "a hundred responses to a (single) call". Once the master-slave mode is settled, " SLAVE" will be locked in the main interface and exclusively controlled by "MASTER". When there is a "SLAVE" signaling of protection mode, all the DC sources will turn off and exit master-slave mode.
(5) Series Mode Functions
APM programmable 150 VDC source via its RS485 interface can be operated by using up to 31 units of the device ,thus makes it possible to simultaneously control all the DC sources connected on RS485 from PC .

المواصفات الفنية:

	Model	SPS150VDC1000W	SP150VDC2000W	SP150VDC3000W	SP150VDC4000W
1	Input Voltage Range	90-265VAC	190-265VAC	190-265VAC	190-265VAC
2	Input Frequency Range	47-63Hz
3	Power Factor	>0.98
4	Input Power	1300VA(MAX)	2400VA(MAX)	3400VA(MAX)	4500VA(MAX)
5	Output Voltage Range	0-150V
6	Output Current Range	0-30A
7	Voltage Load Regulation	15mV
8	Current Load Regulation	30mA
9	Voltage Setting Accuracy	0.1%+15mV
10	Current Setting Accuracy	0.1%+30mA
11	Voltage Measurement Accuracy	0.1%+15mV
12	Current Measurement Accuracy	0.1%+30mA
13	Voltage Ripple_[1]	80mVp-p/15mVrms
14	Current Ripple_[1]	60mA (Full Range) 10mA (TYP value)
15	Voltage Temperature Coefficient_[2]	100ppm/℃
16	Current Temperature Coefficient_[2]	150ppm/℃
17	DVM Resolution	1mV
18	DVM Accuracy	0.1%+15mV
19	Remote Compensation	5V MAX
20	Load Transient Response Time	≤2ms	≤3ms	≤2.5ms	≤2.5ms
21	Command Response Time	50ms
22	Efficiency(Full Load)	88%	90%	92%	93%
23	Protection Function	OVP/OCP/OTP/OPP/SCP/Fold back function
24	Weight	13.2kg
25	Communication Modes	Standard:RS232/RS485/USB Option:RS232/RS485/USB/LAN/GPIB
26	Operating Environment	Temperature 0~40℃,Relative Humidity 10%~90%(no condensation)

[1] Test Condition: Voltage ripple, CV (Constant Voltage) mode-rated output voltage (Vp-p 20MHZ, Vrms 1.25MHZ); Current ripple: CC (Constant Current) mode (Arms 1.25MHZ)

Current ripple typical value parameter standard, test under condition that nominal voltage of the model is fully loaded, at the same time, when the full range output voltage of the model is full load output, the effective value of the current ripple is among the gamut مجموعة المرجعية.

[2] Test Condition: Ambient temperature is among 0~40℃

صورة المنتج